Lesson Plan Kindergarten Essay Example for Free

Lesson Plan Kindergarten Essay Lesson plan Pre-K/Kindergarten Objectives: Children will learn their ABCs by picture association and also learn the words that go along with it. Students use spoken, written and visual language to accomplish their own purposes (learning, enjoyment, persuasion and the exchange of information). GLE: . Demonstrate understanding of alphabetic principle by doing the following: †¢identifying own first name in print †¢identifying at least eight uppercase or lowercase letters, focusing on those in the student’s name (PK-LL-L3) (ELA-1-E1) Materials: Alphabet cards with pictures on the front and the word on the back Introduction: Start out by going through the ABCs in different manners (songs, videos). Methods/Procedures: Once the children are clear on their alphabet, start with the cards. Each card should have a letter with a word on the other side. On the side with the letter there should a picture of what the word is on the other side. Have the students say the letter and then try to guess what the picture is. Once they have guessed the picture, show them the word and go through the spelling. With this lesson students will learn not only new words and picture recognition. Plans for individual differences: I would take the special needs children to my desk one at a time so they could get a fair shot at recognizing the letters, pictures and words. They should still try with the whole class though. Also I will follow any accommodations listed on their IEP. Assessment/Evaluation: I would evaluate this activity by watching each child in the class. I would also set aside time to take each child to the side and go over a few words with them by themselves.

Analysis of Heavy Metals Contamination in Urban Dust

Analysis of Heavy Metals Contamination in Urban Dust 2.1 REVIEW OF REPORTED STUDIES 2.1.1 Assessment of Heavy Metal in Street Dust in Kathmandu Metropolitan City and their Possible Impacts on the Environment. Chirika S.T. Pawan R.S.9 conducted a study in 2011 to determine the levels of heavy metals in street dust at different localities in the Metropolitan City of Kathmandu, Nepal. A total of 20 street dust samples were collected from four sampling sites such as mechanical workshops, motor parks, market areas and residential areas as well as dust were collected from sites which were not affected by traffic. The collected samples were digested using aqua regia through microwave digestion and heavy metals were determined using a SOLAAR M5 Dual Automizer Atomic Absorption Spectrophotometer. The mean concentration of level of lead and nickel were 80.3 and 52.9 Â µg/g. However, the highest lead concentration was 116.8 Â µg/g at the mechanical workshop, which were directly associated with the emissions from vehicles exhaust since vehicles were still using leaded gasoline although it was banned in Nepal. 2.1.2 Multivariate analysis of heavy metals contamination in urban dust of Xi’an, Central China For this study undertaken in 2005, Yongming H. et al.23 collected sixty-five samples of urban dust in Xi’an. The aim of this study was to determine the level of heavy metals such as Pb, Cr, Ag, Hg, Mn, Sb, Zn, Cu and As, as well as to identity their natural sources. Xi’an was selected for this study since it was the central city consisting of heavy metals industries, textile industries and chemical industries. The collected samples were digested using HF, HNO3, H2SO4 and HClO4. The determination of heavy metals such as Cu, Pb, Zn, Cr, Ag and Mn where carried out using Vario 6 atomic absorption spectrophotometer whereas Hg, As and Sb were analyzed by cold vapor atomic spectrometry. The highest mean concentration was found to be of lead, Zinc, Manganese and Chromium which were 230.5, 421.3, 687 and 167.3 Â µg/g respectively. It was concluded that the high concentration originate mainly from industrial sources as well as traffic sources. Further, the high concentration of Mn was found to originate from soil sources which were considered to be a mixture of natural and anthropogenic sources. 2.1.3 Determination of Heavy Metals content in Soils and Indoor Dusts From nurseries in Dungun, Terengganu Tahir M.N. et al.22 determined the concentrations of certain heavy metals such as Al, Fe, Pb, Zn, Cd, Mn and Cu, in indoor dusts and outdoor soils from nurseries located in industrial, town and village area found in Dungun district, which was one of the coastal towns located in Malaysia. For this study carried out in 2007, eighteen sampling sites where chosen which were nursery schools. The sampling sites were divided into three groups: the first group was at the center of the town and near heavily frequented urban traffic routes; the second group selected was found in the south region of the town and was considered as industrial area. This region had high density of petroleum chemical industry, power plant and main roads with heavy traffic loads. The Third group was village, situated at the edge of the urban area which was a quiet residential district with low volume of traffic and negligible industry. The collected samples were then digested and heavy metals concentrations in both soils and dust indoors were determined using atomic absorption spectrometer (FS 220A VARIAN). The range of metal observed were 46.9 Â µg/g for Cu, 338 Â µg/g for Mn, 4.66 Â µg/g for Cd, 130 Â µg/g for Zn, 91.7 Â µg/g for Pb and 114000 Â µg/g for Al. However, from the result obtained, it was found that the village areas had higher level of toxic metals compared to both town and industrial areas for outdoor soils. On the other hand, industrial areas had exhibited higher mean concentration of Cu, Mn, Fe, Pb and Zn in their indoor dusts which originated from infiltration of outdoor particles, dust, soils, internal ventilation system, cooking smoke, old paint and furniture materials. In general, results obtained from this study showed that some nursery schools in Dungun had high levels of heavy metals content in soils and indoor dust. It was suggested that the major source of these heavy metals in soils was due to the road vehicular emission. 2.1.4 Metals Levels in Indoor and Outdoor Dust in Riyadh, Saudi Arabia Al-Rajhi A.S. et al.3 conducted a study to determine the concentration of heavy metals in outdoor and indoor dusts in Riyadh, Saudi Arabia. In 1996 , outdoor dust samples were collected from 231 sites including various rural, suburban, and urban, motorway and two industrials sites and indoor samples were collected from 20 public community centres. The samples were digested using aqua regia and were then analyzed for heavy metals using atomic absorption spectrometer (Perkin-Elmer model 1100). The mean concentration of indoor dust were 639 and 52.9 Â µg/g respectively for lead and nickel and the outdoor dust concentrations for lead and nickel were 1762 and 43.9 Â µg/g respectively. Among all these metals analyzed, lead had the highest concentrations. This was due to the use of leaded fuel, with levels being especially high near motorways as a result of high traffic density. However, it was observed that there was a decreased in lead levels in suburban and rural areas where automobile emissions were much less than in urban areas. 2.1.5 Investigation of Trace Heavy metal Concentrations in the Street Dust Samples Collected from Kayseri, Turkey Divrikli U. et al.12 investigated the levels of heavy metal ions of the street dusts from Kayseri, Turkey. A total of 77 street dust samples were collected during the period of April 2000 till June 2000 and control samples were collected from three hills outside Kayseri that were not affected by metal sources. After digestion with aqua regia, the samples were analyzed using flame atomic absorption spectrometry. The range of concentrations of heavy metals was 84 -532 Â µg/g for lead and 49 -381 for nickel. It was observed that high levels of lead in dust were from combustion of gasoline. The highest concentration of lead (165.5 Â µg/g ) was observed around street carrying heavy traffic and the minimum concentration was 103.3 Â µg/g which was from school garden. For nickel, the source was from abrasion and corrosion of nickel containing parts of the vehicles in the traffic. The highest concentration was 57.3 Â µg/g which was observed in heavy traffic. 2.1.6 Lead Distribution in Near-Surface Soils of Two Florida Cities: Gainesville and Miami, USA In 2004, Chirenje T. et al.8 conducted a study to determine lead distribution in soil in two Florida urban areas, having different levels of industrial development and population. 240 samples were collected from three land-use classes: residential, commercial and public land. They were digested using USEPA method (hot plate digestion) and analyzed using graphite furnace AAS. After analysis of the samples, it was found that the average concentration of lead in Gainesville was 16 mg/kg while 93 mg/kg was observed in Miami. Considering Gainesville, the lead concentration increased as follows: public parks (10 mg/kg), commercial areas (18 mg/kg), public buildings (20 mg/kg) and residential areas (23 mg/kg) whereas for Miami the increased was from: public buildings (77 mg/kg), public parks (79 mg/kg), residential (102 mg/kg) to commercial areas (120 mg/kg). Hence, the higher lead concentration was found in Miami, which was mainly due to the soil properties rather than just anthropogenic factors. 2.1.7 Heavy Metal Concentrations in Street and Leaf Deposited Dust in Anand City, India Bhattacharya T. et al.6 investigated the heavy metal concentrations in street and leaf deposited dust in Anand City, India in 2011 . Street dust samples and leaf deposited dust samples were collected from five major roadways selected on the basis of traffic load, population density and anthropogenic activities and analysis for Cu, Ni, Pb and Zn were carried out. The samples were digested and analyzed using AAS (Perkin Elmeyer model). The mean metal concentration in street dust sample varied with sampling location. Lead concentration (105.4 mg/kg) in dust samples was consistently high. The high Pb concentration was interpreted as resulting from the continued use of leaded gasoline on the outskirts of the city since some petrol stations were stilling selling unleaded petrol. In addition, Pb was also used in manufacture of pesticides, fertilizers, paints, dyes and batteries. Therefore industrial sources had also contributed to Pb levels from vehicle emission. The concentration of nickel in the street dusts ranged from (56.9-75.81 mg/kg). The main source of nickel in street dust was the combustion of diesel fuel. Unexpectedly, nickel content was relatively higher, compared to other metals, in the rural area suggesting that the extensive use of diesel in three wheelers, tractors and water pumps used for irrigation in rural areas was contributing the elevated level in dust. 2.1.8 Heavy Metal Concentration in Road Deposited Dust at Ketu-South District, Ghana Addo M.A et al.1 carried out a study in 2012 to determine the metal concentration in deposited dust along the road of Ketu-South District, Ghana. Fifty sampling sites were selected from popular roads that experiences intense traffic conditions within the district. The collected samples were allowed to dry for 10 days and were analyzed by X-ray Fluorescence Analysis. The lowest metal concentration was: 0.4 ÃŽ ¼g/g for As; 284 ÃŽ ¼g/g for Cr; 18.4ÃŽ ¼g/g for Cu; 233 ÃŽ ¼g/g for Mn; 12.3 for Ni; 3.1 ÃŽ ¼g/g for Pb; and 18.2 ÃŽ ¼g/g for Zn. It was noted in a roadway which runs through a host of rural communities. The maximum concentration of Cr (9106.0 ÃŽ ¼g/g), Mn (1240.0 ÃŽ ¼g/g), and Pb (67.80 ÃŽ ¼g/g) were found in road soil samples collected from the roadway normally patronized by heavy trucks used in conveying cement products and raw materials to and from the cement factory. Therefore, much cement dusts were spread along the road as loaded cement trucks made use of the road. The source of Cu and Zn in the samples was indicated by research as tire abrasion, the corrosion of metallic parts of cars, lubricant and industrial. 2.1.9 Heavy Metal Determination in Household Dust from Ilorin City, Nigeria Adekola F.A et al.2 collected samples from 18 different locations in Ilorin, which was the capital of Nigeria, to determine the levels of lead, cadmium, nickel, copper and iron in indoor dusts. Sampling was done daily in the morning between the months June and September, 1998. The collected samples were digested and the concentrations of metals were determined using atomic absorption spectrophotometer (Pye Unicam Model 2900). The mean metal concentration in dust sample varied with sampling location. The range of concentration of heavy metals was (2.34 -10.17) mg/kg for Pb, (0.19 -1.99) mg/kg for Cu, (0.001 – 0.38) mg/kg for Cd, (0.006 -2.19) mg/kg for Ni and (28.6 -45.4) mg/kg for Fe. The high levels of concentration of Pb, Ni and Fe were mostly likely originated from sources such as emission from automobiles and fall out from wall paint. Further, the important levels of Fe observed in all locations were due to the nature of the local soil and the intensity of human activities in the various localities. 2.1.10 Water-Soluble Species and Heavy Metals Contamination of The petroleum Refinery Area, Jordan In 2002 , Momami A.K et al.16 investigated the levels of Pb, Cd, Cu, Zn, Al, Cr and Fe in street dust, soil, and plants in the Jordanian petroleum refinery. Eighty- one street dust samples, coded D1-D18, were collected from different sites such as highway, housing area, manufacturing area, main gates, loading parking area, tanker loading area and major refining units. The collected samples were dried and digested using concentrated nitric acid. Heavy metals were then determined using a Thermo Jarrel Ash Flame Atomic Absorption spectrometer, (Model Smith-Hieftje 11, USA, with SH back-ground correction. For determination of low concentrations of heavy metals, a Graphite Furnace Atomic Absorption Spectrometer (GFAAS) was utilized. The mean concentration of heavy metals obtained was as follows: Pb (77 Â µg/g), Cu (69 Â µg/g), Zn (178 Â µg/g), Fe (4510 Â µg/g), Cr (21 Â µg/g) and Cd (1.38 Â µg/g). The highest levels of lead were observed in the housing area, streets between loading parking area, the road tanker loading area and at streets near the main gate of the refinery. The high lead contamination at the housing area and at the main gate was due to automobile exhaust emission since most automobiles passed through these sites. Also fuel leaks, spills, and exhaust emissions from tankers in the loading parking area and tanker loading area was responsible for lead contamination occurring at these sites. Further, high concentrations of the other metals: Cu, Zn, Cd and Cr were commonly found in the manufacturing area, and around the major refining units. These findings indicated that materials used in manufacturing cylinders, major refining processes, leaks of oil product during loading of tankers, and motor vehicles were the primary sources of these heavy metals. Additionally, existence of CU in street dust was derived from engine wear of automobiles, while attrition of automobile tires and lubricating oils were possible sources of Zn and Cd. 2.1.11 Soil Lead Pollution alongside Some Major Roads In Mauritius In 2000 , Choong Kwet Yive N.S et al.10 conducted a study to determine the lead levels in soil alongside main roads in Mauritius which were caused mainly by vehicular exhaust. Four Mauritian roads with different traffic densities were selected for sampling. The collected samples were digested using Milestone microwave digester and the lead determination was carried out using atomic absorption spectrometer (UNICAM 929). The mean lead concentration in dust sample varied with sampling location. The highest lead concentration, 1938 Â µg/g, was found at Rd1, which was the major motorway having the highest traffic density. Further, it was also reported that the west side of Rd1 had a concentration of 786 Â µg/g compared to that on the east side (536 Â µg/g). This was due to the South- East Trade Wind which blows the lead particulate to the left side of the road. The low concentration of lead found was 12 Â µg/g, which was due to the dry weather and compact soil. It was concluded that the major sources of lead pollution in street dust was due to vehicular emission. 2.1.12 Monitoring of Pb and Ni in Street Dust Coming from Vandermeersch Street Jhurry K.R.15 conducted a study in street dust coming from Vandermeersch Street, to determine Pd and Ni concentration. Sixty- four dust samples were collected over a period of four months from August to November 2011. The collected samples were acid digested using microwave digester system and then analyzed using FAAS. The mean concentration of heavy metals was 65.4 ppm for lead and 208.2 ppm for nickel. Further, it was also reported that the left side of the road had the highest metal concentration compared to that on the right side. This was due to the South-East Trade Wind, blowing the dust particulate toward the left. The high Ni concentration observed was due to traffic density. Considering the lead concentration, it has decrease considerably since there was a shift from leaded gasoline to unleaded one. Further, other factors affecting lead level from one place to another was seasonal behavior and human activities. 2.1.13 Lead and Nickel Levels near Vandermeersch Street. Summoogum Y.P.21 carried out a study to determine the lead and nickel levels in street dust at Vandermeersch Street, Mauritius. A total of 80 samples were collected from 8 different sampling sites over a period of five months from August to December 2012. The concentration of lead and nickel were determined using FAAS after digestion in acids using microwave digester. The mean concentration of heavy metals obtained was 32.6 ppm for lead and 52.5 ppm for nickel. The concentration of nickel was explained by the increase in traffic volume, which was mainly due to abrasion and corrosion of vehicular parts. Moreover, it was seen that the left side of the road was more polluted than that of the right, showing the effect of the South-East Trade Wind which blow the dust particulate toward the west side of the road, causing accumulation. For lead, it was seen that there was significant decrease since the use of leaded gasoline was banned in September 2002 and unleaded gasoline was introduced all over the island.

Twelfth Night Essays: Learning About Love :: Twelfth Night essays

  Ã‚   In Shakespeare's Twelfth Night, it is clearly evident that the fluctuation in attitude in the dual role, situation and tribulations imposed upon the character of Viola/Cesario gives rise to a better understanding of both sexes, and thus, allows Viola to have a better understanding for Orsino. Through the love of Orsino and Olivia, Viola learns the difficulties of love from both standpoints, man and woman's. Near the opening of the play, when Viola is adopting her male identity, she creates another self like two masks and may decide to wear one or the other while swinging between the two identities in emotion and in character. She decides to take on this identity because she has more freedom in society in her Cesario mask, which is evident when she is readily accepted by Orsino, whereas, in her female identity she would not be. Thus, a customary role in society and to the outlooks of others is portrayed. Orsino sees Cesario, as a young squire just starting out in the world, much like himself as a young, spry lad, so he has a tendency to be more willing to unload onto her his troubles and sorrows, seeking a companion with which to share and to teach. Thus, Viola grows in her male disguise to get a better feeling for his inner self, not the self that he shows to the public, or would reveal and share with Viola in her true female self, but rather his secret self, as he believes he shares wi th a peer. So, she grows to love him.    But, Orsino's motivation is actually not love for Viola, but rather he seems to be in love with love itself. His entire world is filled with love but he knows that there might be a turning point for him, like when he says: "If music be the food of love, play on; give me excess of it, that, surfeiting, the appetite may sicken, and so die" (I, i, 1-3). This quote shows that he knows that he is so caught up in "love," that he hopes his appetite for love may simmer when he takes more than he can handle.    Near the end of the play, when all tricks and treacheries are revealed and all masks are lifted, Orsino "falls" in love with Viola. He first forgives her of her duty to him, the master; then says that she shall now be her master's mistress.

Sex in Movies Essay -- Media Entertainment Films Essays

Sex in Movies Has the role of sex gained too much importance in todays movie industry? The answer to this highly publicized question, although highly depending on personal opinion, is no. The growth of sex in movies is directly related to the growth of its role in modern society. The movie industry has no choice but to adapt to a society with changing entertainment needs. The movie industry is just what it says, an industry. An industry that has one goal similar with all other industries, to make money. Compare the movie industry to other industries in todays society. Other forms of industry like the alcohol industry are allowed to operate without constant criticism from public figures. I understand that the alcohol industry runs on a strict set of guidelines and provides for reasonable age limits, but switch back to the movie industry. Most movies are mere ideas of their original versions after they are subjected to industry limitations. The rating system also provides for assurance that viewers are of a mature age to handle the content of movies. Skeptics of modern society use the movie industry as a scapegoat. They make unjust claims that the movie industry is the cause of changes in our society. This is impossible, a movie completely contrary to modern standards and beliefs would not be accepted. In todays high dollar industry one flop would be enough to nearly end the career of a new producer or company. A mistake this costly is not worth the risk. Skeptics should look for actual causes of the shift of morals in society and not concentrate on an industry that happens to be profiting from the shift. Other critics would like to see sex portray... ...st is always on the move and has a fear of settling down. Her true love for Tomas and Teresa is shown in the final scene when she learns of their death. Tomas, Teresa, and the artist are all caught up in a dangerous love triangle in this movie. The sexual action catches the attention of the audience and arouses their curiosity on sexual inhibitions. This play on human curiosity is a genius move on the part of the film makers. Sex is a needed part of this movie. Although it may drown out the political plot of the movie, it is also an equally important plot. The film makers used the war setting to show that humans and their sexual habits exist everywhere through any type of chaos. Overall sex in the movie industry is natural. Humans want sex. Sex is a physical fact. The movie industry is just practicing good business.

Sometimes People Are Unable to Control the Directions Their Lives Take.

Sometimes people are unable to control the direction their lives take. This can be a hard concept to grasp, but one needs to understand that one cannot control every single detail or event in one’s life, and also cannot possibly predict what will happen in the future. Obstacles of every kind will strike, whether these trials come in the form of day to day hardships, catastrophic natural disasters, or even the fate of the gods. The only thing one can really do is adapt to the new situation and try to move forward. Making decisions can be extremely difficult but one of the worst feelings a person can have is having a decision made for you. Although one may consider these changes in direction to be trivial, in truth they may actually have the power to alter the path of one’s life. Like many Grade Twelve's, I put my fate into the hands of the Admissions Office of each prospective University. I had done everything I could in the beginning of the year to get respectable grades and be accepted into all the schools I wanted, just so I had every possible option available to me. It started off well, with my early acceptance to Queens University and University of Alberta but then came McGill University. It had been one of my top choices, and I was tremendously disappointed. Although I have now accepted that I have no chance of attending McGill this upcoming Fall, it was still painful to think that an entire future, a whole different person that I could have become, died away with that one rejection letter. In time, I realized there was nothing left to do but to go check out the other universities. Fortunately, I fell in love with the Queens University campus just two weeks ago after visiting it for the first time. As Martin Luther King Jr. said, â€Å"We must accept finite disappointment, but never lose infinite hope. Though I may not be able to control the unexpected twists in my life, at least I know that I will always be able to face any upcoming challenges with a strength and determination that I will always be able to control. Additionally, people always find themselves unable to control the direction their lives take when natural disasters strike. This unfortunate destruction can come in the form of a tsunami in Asia, Hurricane Katrina or most recently, the earthquake in Haiti. Considered one of the worst natural disasters in recent history, the quake caused immense damage to structures f all kinds, and wreaked havoc upon millions of lives. These poor people had no real way of knowing a disaster that immense would strike, and ultimately were powerless to stop its terrifying force. Unfortunately, the citizens of Haiti had to experience a complete change to their lifestyle, and were forced to deal with a massive obstacle that the rest of the world could barely comprehend. All that these victims could do was accept that they had no control over what happened, and then attempt to pick up the pieces of their lives amidst the chaos that surrounded them. Truly, human beings are left powerless to control the detrimental effects that Mother Nature has on their lives when a natural disaster hits. Furthermore, no matter how many obstacles or how impossible they may seem, even if against the will of the gods, one must still try to move forward. In Homer’s timeless epic, The Odyssey, the protagonist Odysseus is faced with countless trials and tribulations that he must endure before he may finally return home. After the great battle of Troy, Odysseus attempts to return to his love, Penelope and son, Telemachus. Unfortunately his homecoming is delayed an endless 10 years because of the reckless actions and behaviours of himself and his crew which have angered the Greek gods. Consequently, the gods provide them with a series of dangerous obstacles presenting tragedy, death, and destruction to the mortals. He has no choice but to meet every challenge without question if he is to ever see his home again. In the end, it is not his triumphs at Troy but his persistence and ability to never give up on his voyage home that makes Odysseus so infamous. Many times people find themselves unable to control the direction their lives take. While this can be unbelievably frustrating, one needs to keep in perspective that one cannot control every single detail of his or her life, and moreover one cannot predict what may or may not happen in the future. When something that is out of one’s control alters one’s set course, all that person can do is work through the hardship and attempt to find some solid ground once more. It is inevitable that life will take some nasty turns over the years, but one must accept that once the unexpected hits, the only thing that one can do is adapt to the situation and carry on.

Ano Ang Kahulugan Ng Impression?

Marvic S. Garcia 211 Caoibes St. Balayan, Batangas (63)9335615026 / (63)9217691390 [email  protected] com ObjectiveTo continually enhance my knowledge and skills that I possess by absorbing and adopting the techniques whichc can be contributed by the other environment to be able to contribute for the better of myself and field where I belong. Capabilities and Skills Operation of CNC Milling (Makino Seiki MSA50 Fanuc Series16, OKK VS5-II Fanuc Series16i, Mori Seiki DuraVertical 5060 Fanuc)Robodrill T21 I Ee(Fanuc 4-way axis) OKK MC-VM4(4-way axis) and Takizawa(TC-200 L6) lathe machine, Haas VF1, FP3 Deckel, Victor Taichung Milling, DC 100, Okuma Turning(LH55L), Mazak(Mazatroll T-plus) ? Knowledgeable in engineering/mechanical drawings ? Knowledgeable in Mastercam Version 8. 0 (2D/milling process) ? Knowledgeable in Microsoft Word and Excel ? Knowledgeable in Using QC tools (calipers, micrometer, pin gauge, thread gauge, gauge block, digiheight and microhyte)Other capabilities: Well experienced in handling tight tolerance dimensions in fabricating products. Capable of setting-up CNC milling and CNC lathe machines. Can create Manual programs and have background in Mastercam programing for CNC milling with FANUC control. Can handle different types of material such as Aluminums, Plastics, Stainless Steels, Cast Irons and Heat-treated materials. Knowledgeable in different types of working environments (Mass Production/Precision and Tooling) Knowledgeable in fabricating semi-conductor products and Mold parts. Work Experiences Steel Asia Manufaccturing Corp.CNC Machinist Bahay Pari, Meycauayan Bulacan Jan. 2013 – Present Job Description ? Set-up and operate CNC lathe and CNC nutching machine ? Editing programs for CNC lathe machine and nutching machine ? Set-up and operates conventional lathe machine ? Operates welding machine ? Analyzing programs ? Checking, preparing and installing tools to the machine ? Monitoring of the dimensions and appearance of the pro duct ? Filling-up of daily out-put form and inspection sheets ? Operates overhead cranes for lifting materials ? Reporting to superior from time-to-time Ramcar TechnologyCNC Machinist Sta. Maria Industrial Park, Brgy. Bulac Sta. Maria, Bulacan Oct. 2011 – Oct. 2012 Job Description ? Set-up and operate CNC lathe and CNC milling machines ? Creating manual programs for CNC Milling machines ? Analyzing programs ? Checking, preparing and installing tools to the machine ? Operates overhead cranes for lofting-up materials ? Adjustments of parameters, programs and WCS of the machine ? Operates ban saw cutting machine ? Monitoring of the dimensions and appearance of the product ? Filling-up of daily out-put form and inspection sheets ? Reporting to uperior from time-to-time Castem Phils. Inc. CNC Machinist CEPZ, Rosario, Cavite Aug. 2009 – Oct. 2011 Job Description ? Set-up and operate CNC lathe and CNC milling machines ? Creating and Analyzing programs ? Checking, preparing an d installing tools to the machine ? Adjustments of parameters, programs and WCS of the machine ? Monitoring of the dimensions and appearance of the product ? Filling-up of daily out-put form and inspection sheets ? Reporting to superior from time-to-time Enlin Steel Corp. CNC Machinist CEPZ, Rosario, Cavite March 2008 – April 2009 Job Description Operate CNC Lathe Machine ? Se -up CNC lathe machines ? Setting up of tools ? Editing CNC programs ? Checking of the quantity of the material before fabrication ? Conduct inspection from time-to-time ? Conduct preventive maintenance of the machine Dic Seimitsu Phils. Inc. CNC Machinist CEPZ, Rosario, Cavite March 2007-Sept. 2007 Job Description ? Operation of CNC Milling (Makino Seiki MSA50 Fanuc Series16, ? OKK VS5-II Fanuc Series16i, Mori Seiki DuraVertical 5060Fanuc) ? Analyze engineering drawings that can be translated to Mastercam Version 8. 0 programs use in fabrication of products. Jigs, tools and fixtures Fabrication ? Master cam Version 8. 0 milling process programming. ? Use of QC tools such as Caliper, Micrometer, Digiheight, pin gauge, thread gauge, gauge block and microhyte use for inspection before and after fabrication. Nanbu Phils. Inc. Extrusion Staff / Machinist CEPZ, Rosario, Cavite March 2006- Sept. 2006 Job Description ? Set-up extrusion machines ? Fabricating Moulds for extrusion machine ? Cleaning, repairing and Re-machining moulds ? Installing mould and calibrator of the machine ? Conducting pre-heating and booting-up of the machine ?Conducting size checking and visual inspection of the product ? Conducting adjustments of the parameters of the machine if necessary Educational Background Tertiary Balayan Colleges Balayan, Batangas Computer Technology (1997-1999) Secondary Balayan National High School Balayan, Batangas 1993-1997 PrimaryBalayan East Central School Balayan, Batangas 1986-1993 Personal Information Male, Single, July 13, 1980, Balayan, Batangas, Roman Catholic, 5’6†, 136 lbs. I here by attest that all information stated above are true and correct to the best of my knowledge. Marvic S. Garcia

living with your parents advantages Essay

Still living with your parents? Thinking about moving in with your folks because you are unable to pay your own rent, lost your job, just divorced, studying again, can’t afford a house of your own or any other reason? Your move is likely to be driven by a circumstance and a situation you have found yourself in. And as an adult in his/her 20s or 30s, there are advantages and disadvantages of living with your mom, dad or both. Know them before you move back in. Advantages of living with your parents 1) Living on a tight budget: You will save money One of the biggest advantages of living with your parents is that you can save a lot of money. From rent, utility bills, renovations, shared grocery bills and a lot more. If you have just graduated and can’t find a job, if you are out of a job and struggling to pay your debts, if you are facing financial problems – living with your parents could be you answer to saving money on everyday expenses. Think of it as a stop gap arrangement until you get back on your feet. 2) You don’t have to do all the housework Doing the laundry, putting the dishes in the washer, putting them back when they are done, vacuuming, cleaning the living areas from time to time and taking out the trash are just some of the daily chores that need to be done around the house. If you are still living with your parents, you may find yourself exempt from some of these mundane tasks as your mom or dad may be doing them to keep themselves busy. If you are lucky, your mom may even do your laundry while she is at it. 3) You have someone to cook you a nice meal when you can’t As a working professional or a busy student, you may not always have the time to come home and fix yourself a homemade meal. If you were living on your own, you would probably have grabbed a takeaway or a quick bite the local joint. Along with living with your parents comes the added benefit of enjoying warm home cooked meals even if you don’t get the time to cook. Your mom may have something ready on the table by the time you come home from work. 4) Your parents can help with little kids: Big plus for single moms and single dads Single moms and single dads going through a rough patch in life may find it financially, mentally and physically more comfortable to live with their parents until their troubles are sorted out. Only a single mom will know what it takes to work and manage a child. Only a single dad will how it feels to play the dotting dad and the caring mommy at the same time. If you find yourself in a similar situation and are burdened with financial troubles, you could think about the option of living with your parents, at least for a while. From picking up your little kids from school to giving them food when they want, your parents could be the guardian angels that swoop in to help you scrape through when your life hits rock bottom. 5) Familiarity: The feeling of being at home and not with random strangers Besides being cheaper and more convenient, another advantage of living with your parents is that there is a big sense of familiarity. The house is probably the one you grew up in, and you may find sharing your living space with familiar faces more comforting than with random strangers. Dealing with an annoying roommate or housemate is a pain and if you feel like taking time off from renting and sharing, living with your parents could be your stop gap arrangement and peace of mind. 6) The bond of family: You can feel the satisfaction of helping your parents As you live with your parents, you will possibly get many chances to help them and make them feel better. From taking your mom to the doctors to helping your dad do his silly antics in sprucing up the garden, spending time with your parents as they age gracefully can possibly the memories you cherish forever. If your life is going through a rough patch and you are forced to move out of your own home and live with your parents, look at it as an opportunity to share a few extra memories rather than complain. Disadvantages of living with your parents 1) You don’t have privacy or your space Living with your parents will strip you of your space and privacy and that can be a psychological burden if you have been used to living alone for a long time. No longer will you have the freedom to walk straight out of bed and head to the kitchen in your underwear nor will you be able to go naked from one room to another. While these were just two quirky and humorous examples, you should remember that you can say goodbye to your privacy and the concept of having your own space. 2) You can’t call friends over or have house parties Have you always been the guy/girl at whose place friends crash every now and then? That could change when you move in with your parents. A big disadvantage of living with your parents especially from the perspective of someone in their 20s or 30s, is that you can’t call your friends over. You can also forget about hosting parties, whether it is a cozy get-together of your college buddies or some of your office colleagues coming over for a round of after work drinks. 3) You will be given unnecessary advice on your life Whether you move in with your mum, dad or both, you are likely to receive advice on your life even if you don’t ask for it. From the stuff that you eat, the time that you sleep or the number of hours you play video games for, be prepared to get unsolicited advice for just about everything. 4) There will be clash of opinions: You could fallout with your folks Always remember that there is a big generational gap between you and your parents. Don’t expect them to think like you and most importantly, don’t expect them to behave in a certain manner. They will talk and walk in the same way as they have been doing since decades. The difference in outlook towards life will be amplified if there are arguments and petty nit pickings over trivial household issues. One small problem can lead to another, possibly leading to a fallout with your parents. Be prepared for a clash of opinions, keeping in mind that it is you who will have to compromise and let go of many things. 5) Your friends and colleagues will make fun of you The inevitable disadvantage of living with your parents is that your friends and colleagues are likely to make fun of you. You will be known as the 29 year old guy who still lives with his mom or the 31 year old single woman who lives with her folks. There is a certain social baggage that comes along with moving in with your parents once you are an adult, but you will have to take it head on. There is no escaping this and you should prepare yourself for a taunt or two every now and then from the people you are around every day. 6) Your love life is likely to take a tumble Your parents are not likely to be fond of you calling your dates over at their place, especially if the both of you lock yourself in the bedroom for hours. No longer will you be able to think of quirky date ideas within the confines of your own home. Women may not be most impressed if they see you as the guy in his late twenties still living with his parents. Even men may be put off if they form a certain image of a 30 plus year old woman doing the same. 7) You won’t learn the hard lessons of life This applies especially to guys and girl in their twenties who have never moved out of the house. There are a lot of tough lessons and curve balls that life throws every now and then. And by living with your parents, you could be shielding yourself from some of the hardships life has to offer. When you eventually move out, living alone could turn out to be an unpleasant experience as you may have not been used paying rent, struggling to pay bills or not having to do the dishes by yourself every single day of the year. 8) You will not make your way into the property market A financial disadvantage that most discussions overlook is that the longer you live with your parents, the longer it is going to take you to enter the property market yourself. Regardless of the economic situation or the state of the property market, the sooner you buy a house for yourself, the quicker you are going to be done with mortgage repayments. If don’t think of this as a big deal, ask a single dad in his 40s about the burden of a ballooning mortgage and you are likely to get an eye opening reply. 9) Your parents will always treat you as their child You may be 29 years old now but you must remember that your parents will always look at you as their child. You will always be the little guy or girl who held their hands with his/her tiny fingers while taking a walk in the park. No matter how old you get, you will likely be treated as a child. Your mom may continue behaving like the dotting mom while your dad can continue acting like a father figure. Your ego may take a hit when this happens, but it is just another thing that you will have to deal with until you find a place for yourself.